Never miss these 70-512-Csharp questions before you go for test.


surprised to peer 70-512-Csharp ultra-modern Braindumps!

70-512-Csharp assessment test sample | 70-512-Csharp cheat sheets | 70-512-Csharp english test questions | 70-512-Csharp exam prep | 70-512-Csharp real questions - bigdiscountsales.com



70-512-Csharp - Visual Studio Team Foundation(R) Server 2010 Administration CCsharp - Dump Information

Vendor : Microsoft
Exam Code : 70-512-Csharp
Exam Name : Visual Studio Team Foundation(R) Server 2010 Administration CCsharp
Questions and Answers : 60 Q & A
Updated On : November 14, 2017
PDF Download Mirror : 70-512-Csharp Brain Dump
Get Full Version : Pass4sure 70-512-Csharp Full Version


study books for 70-512-Csharp knowledge but make sure your fulfillment with those Q&A.

getting ready for 70-512-Csharp books can be a tricky process and 9 out of ten probabilities are that you'll fail if you do it with none suitable steerage. Thats where first-rate 70-512-Csharp book comes in! It offers you with green and groovy information that no longer most effective complements your education however also offers you a clear cut risk of passing your 70-512-Csharp download and entering into any college without any melancholy. I prepared via this remarkable software and i scored forty two marks out of fifty. i'm able to guarantee you that it will by no means allow you to down!

it's miles proper source to find 70-512-Csharp dumps paper.

70-512-Csharp questions from killexams.com are extremely good, and replicate precisely what check center offers you at the 70-512-Csharp exam. I loved everything about the killexams.com coaching fabric. I handed with over 80%.

proper source to get 70-512-Csharp modern brain sell off paper.

It became simply 12 days to strive for the 70-512-Csharp exam and i used to be loaded with a few points. i was looking for a easy and effective manual urgently. eventually, I got the Q&A of killexams. Its brief solutions have been no longer hard to complete in 15 days. in the real 70-512-Csharp examination, I scored 88%, noting all of the inquiries in due time and got 90% inquiries just like the pattern papers that they supplied. an awful lot obliged to killexams.

I need braindumps of 70-512-Csharp examination.

They fee me for 70-512-Csharp exam simulator and QA document however first i did no longer got the 70-512-Csharp QA material. there has been some file blunders, later they constant the error. i organized with the examination simulator and it changed intoproperly.

No more struggle required to pass 70-512-Csharp exam.

I could certainly deal with 93% marks in the long run of the exam, as numerous inquiries have been like the adviser for me. much favored to the killexams. I had a weight from workplace to cut up the examination 70-512-Csharp. however, i used to bestressed over taking a decent making plans in little time. At that point, the killexams.com Q&A aide confirmed up as a providence for me, with its easy and quick replies.

it is exquisite to have 70-512-Csharp real Questions.

killexams! Big thanks to you. Last month when I was too much worried about my 70-512-Csharp exam this site help me a lot for scoring high. As everyone knows that 70-512-Csharp certification is too much difficult but for me it was not too much difficult, as I had 70-512-Csharp material in my hand. After experiencing such reliable material I advised to all the students to incline towards the best educational services of this site for your preparation. My good wishes are with you all for your 70-512-Csharp certificate.

Dont forget to try these braindumps questions for 70-512-Csharp examination.

i've renewed my club this time for 70-512-Csharp examination. I take delivery of my involvement with killexams.com is so crucial it is not possible give up via not having a club. i'm able to just consider killexams.com exams for my examination. simply this web page can assist me achieve my 70-512-Csharp accredition and assist me in getting above 95% marks inside the examination. You all are honestly making an top notch showing. maintain it up!

Did you tried this extremely good source of actual questions.

Your query bank is need of the hour. i've were given 89.1% in the 70-512-Csharp exam. excellent needs in your professionals. thank you group. so delighted to clear this examination. Your observe material was extremely useful, clear, consise, covering entire material and suberb stacking of questions to make one strong preparation. thank you again to you and your group.

Did you attempted this exceptional source of latest Braindumps.

I passed 70-512-Csharp exam. I think 70-512-Csharp certification is not given enough publicity and PR, since its really good but seems to be under rated these days. This is why there arent many 70-512-Csharp brain dumps available for free, so I had to purchase this one. Killexams.com bundle turned out to be just as great as I expected, and it gave me exactly what I needed to know, no misleading or incorrect info. Very good experience, high five to the team of developers. You guys rock.

surprised to peer 70-512-Csharp ultra-modern Braindumps!

I passed 70-512-Csharp exam. I assume 70-512-Csharp certification isn't always given sufficient publicity and PR, on the grounds that its actually properly however seems to be beneath rated nowadays. that is why there arent many 70-512-Csharp mind dumps to be had without cost, so I had to purchase this one. Killexams.com package grew to become out to be just as tremendous as I expected, and it gave me precisely what I needed to know, no misleading or incorrect info. excellent revel in, high five to the group of developers. You men rock.

See more Microsoft dumps

72-640 | MB6-890 | 70-561-CSharp | 70-762 | 70-523-VB | 70-542-CSharp | 71-687 | MB2-718 | 70-548-Csharp | 70-511-VB | 70-536-CSharp | MB2-716 | MB2-717 | 71-571 | MOS-OXP | 70-553-VB | MB2-710 | MOS-EXP | MB2-186 | 70-741 | 70-511-CSharp | 70-569-CSharp | 70-523-CSharp | 70-534 | MB5-292 | 70-410 | 70-463 | MB6-893 | 74-409 | 70-412 | 77-888 | 70-348 | 70-417 | 70-743 | 98-369 | MOS-E2E | 70-516-CSharp | 70-638 | MB2-707 | 70-464 | 70-544 | 77-881 | 70-467 | 70-243 | 70-576-CSharp | 70-334 | 70-498 | MB4-213 | 70-515-CSharp | MB3-209 |

Latest Exams added on bigdiscountsales

1Z0-453 | 210-250 | 300-210 | 500-205 | 500-210 | 70-765 | 9A0-409 | C2010-555 | C2090-136 | C9010-260 | C9010-262 | C9020-560 | C9020-568 | C9050-042 | C9050-548 | C9050-549 | C9510-819 | C9520-911 | C9520-923 | C9520-928 | C9520-929 | C9550-512 | CPIM-BSP | C_TADM70_73 | C_TB1200_92 | C_TBW60_74 | C_TPLM22_64 | C_TPLM50_95 | DNDNS-200 | DSDPS-200 | E20-562 | E20-624 | E_HANABW151 | E_HANAINS151 | JN0-1330 | JN0-346 | JN0-661 | MA0-104 | MB2-711 | NSE6 | OMG-OCRES-A300 | P5050-031 |

See more dumps on bigdiscountsales

000-154 | M2050-655 | 299-01 | LX0-103 | 000-N12 | 000-N40 | S90-02A | L50-501 | 000-198 | 000-058 | LOT-440 | 000-906 | C2140-839 | C2040-924 | 000-M98 | HP2-E50 | HP0-058 | 000-541 | 9A0-389 | C2090-913 | 000-431 | HP5-H04D | A2010-005 | MB2-228 | 3000 | 70-697 | C9020-562 | VCP-101E | 700-101 | 000-068 | 000-M36 | 310-091 | C2010-593 | E20-351 | CICSP | 050-695 | 000-M79 | C_TB1200_88 | CMS7 | 111-056 | C_SM100_718 | 050-683 | OCN | 000-089 | JN0-101 | 500-451 | 000-183 | 050-694 | 922-096 | 190-840 |

70-512-Csharp Questions and Answers


QUESTION: 44

You have a Visual Studio Team Foundation Server 2010 environment. You have a team project named Contoso. You create several work item queries for the Contoso team project in the default project collection. You need to allow test team members to view and edit the work item queries without allowing them access to other queries in the team project. What should you do?

  1. Add the test team members to the Readers team project security group.
  2. Add the test team members to the Contributors team project security group.
  3. Place the queries in a folder in the My Queries container. Add the test team members to the builtin Project Collection Test Service Accounts group, and grant the group Contribute permissions to the Team Queries container.
  4. Place the queries in a folder in the Contoso Team Queries container. Create a custom team project security group named Testers in the Contoso team project, add the test team members to the group, and then grant the group Contribute permissions to the folder.

Answer: D


QUESTION: 45

You have a Visual Studio Team Foundation Server 2010 environment. You are unable to update your work items by using data stored in a Microsoft Office Excel 2007 worksheet that has been created from a work item query within a team project. You need to ensure that Excel can connect to the Team Foundation Server environment. What should you do?

  1. Upgrade to Microsoft Office 2010.
  2. Install Visual Studio Team Explorer 2010.
  3. In Excel 2007, from the Developer tab of the ribbon, modify the properties of the worksheet controls.
  4. In Excel 2007, from the AddIns page of the Excel Options dialog box, open the Excel AddIns dialog box and add the Team Foundation addin.

Answer: B


QUESTION: 46

You perform a default installation of Visual Studio Team Foundation Server Proxy for use by a remote development team. You need to configure Visual Studio Team Explorer 2010 to connect to Visual Studio Team Foundation Server 2010 through the proxy server.

In the Source Control node of the Team Explorer Options dialog box, you select the Use proxy server for file downloads check box. What should you do next?

  1. Provide the proxy server name and port 8080.
  2. Provide the proxy server name and port 8081.
  3. Provide the application tier server name and port 8080.
  4. Provide the application tier server name and port 8081.

Answer: B


QUESTION: 47

You have a Visual Studio Team Foundation Server 2010 environment. You change your computer name from Computer1 to Computer2. You need to update the workspaces on your computer with the new computer name. What should you do?

  1. Run the tf workspace command with the /computer:Computer1 switch.
  2. Run the tf workspace command with the /computer:Computer2 switch.
  3. Run the tf workspaces command with the /updateComputerName:Computer1 switch.
  4. Run the tf workspaces command with the /updateComputerName:Computer2 switch.

Answer: C


QUESTION: 48

You have a Visual Studio Team Foundation Server 2010 environment. The Get Latest operation for a branch is running slowly. The branch includes a large documentation folder that the documentation team updates frequently. The documentation folder is not necessary for your current work. You need to increase the performance of the Get Latest operation. What should you do?

  1. Cloak the documentation folder.
  2. Uncloak the documentation folder.
  3. Create a shelveset for the branch.
  4. Create a shelveset for only the documentation folder.

Answer: A


QUESTION: 49


You have a Visual Studio Team Foundation Server 2010 environment. The process of synchronizing the local workspace with the source code files in Team Foundation Server version control is slow. During synchronization, many files that are unnecessary or are in branches unrelated to the current project are being downloaded. You need to shorten the synchronization time and not download folders containing unnecessary files. What should you do?

  1. Cloak the folders containing the unnecessary files.
  2. Uncloak the folders containing the unnecessary files.
  3. Run the tf branch command with the /noget option.
  4. Run the tf branch command with the newitem argument.

Answer: A


QUESTION: 50

You have a dualtier Visual Studio Team Foundation Server 2010 environment. The Team Foundation Server databases are backed up nightly. You modify source code in a solution but you are not yet ready to check in the pending changes. You need to share the pending changes with team members without checking them in, and ensure that they are backed up during the normal Team Foundation Server backup process. What should you do?

  1. Create a shelveset that includes the pending changes.
  2. Create a changeset that includes the pending changes.
  3. Create a shared folder on the data tier server and copy the source code files to that folder.
  4. Create a shared folder on the application tier server and copy the source code files to that folder.

Answer: A


QUESTION: 51

You have a Visual Studio Team Foundation Server 2010 environment. All contractors in your organization are members of a Team Foundation Server security group named Contractors that has been granted only the Read version control permissions. Lead developers have been granted all version control permissions. You need to implement a workflow that requires lead developers to review the source code changes made by contractors before they are committed to version control. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

  1. Grant the Check In version control permissions to the Contractors security group.

  2. Grant the Check Out version control permissions to the Contractors security group.
  3. Instruct contractors to create a shelveset that includes the pending changes. Require that a lead developer check in the source code changes on behalf of the contractors.
  4. Instruct contractors to check in the source code changes. Require that a lead developer review the changeset and roll back the changeset if necessary.

Answer: B, C


QUESTION: 52

You have a Visual Studio Team Foundation Server 2010 environment with a team project collection that has only one build definition. The build definition uses the default build process template (DefaultTemplate.xaml). The build definition trigger is set to Manual. You have the following requirements:
Verify that a build will run successfully on a build server with the pending changes. Do not commit the pending changes.
You need to perform a build that meets the requirements. What should you do?

  1. Set the build definition trigger to Gated CheckIn. Then check in the pending changes.
  2. Queue a build and set the Private Drop Location process parameter to a UNC file share path on the application tier server.
  3. Create a shelveset that includes the pending changes. Then queue a build using the Latest sources with shelveset parameter, and specify the shelveset.
  4. Create a custom Boolean build parameter named PrivateBuild in the build process template for the build definition. Then queue a build and set the PrivateBuild process parameter to True.

Answer: C


QUESTION: 53

You have a Visual Studio Team Foundation Server 2010 environment. Your branching plan includes Main, Development, ServicePack, Hotfix, and Release branches, as shown in the exhibit. (Click the Exhibit button.)

image

Your team fixes a bug and checks in a code change to the Hotfix branch. You need to merge the code change into the Main and Development branches without performing a baseless merge. What are two possible ways to achieve this goal? (Each correct answer presents a complete solution. Choose two.)

  1. Run the tf Merge command to merge the changes from the Hotfix branch to the Main branch and then from the Hotfix branch to the Development branch.
  2. Run the tf Merge command to merge the changes from the Hotfix branch to the ServicePack branch, from the ServicePack branch to the Main branch, and then from the Hotfix branch to the Development branch.
  3. In the Track Changeset window, merge the changes from the Hotfix branch to the ServicePack branch, from the ServicePack branch to the Main branch, and then from the Main branch to the Development branch.
  4. In the Source Control Explorer window, merge the changes from the Hotfix branch to the ServicePack branch, from the ServicePack branch to the Main branch, and then from the Main branch to the Development branch.

Answer: C, D


QUESTION: 54

You have a Visual Studio Team Foundation Server 2010 environment. You have a team project that consists of a single application. The team project has the version control branching structure shown in the following graphic. You release hotfixes to the current version of the application from the Release branch. You release new versions of the application from the Main branch. Your team is currently working in the Development branch. You develop a hotfix to the application in the Release branch. You need to ensure that the hotfix changeset is in every future release of the application. What should you do?

  1. Merge the changeset from the Main branch to the Release branch.
  2. Merge the changeset from the Release branch to the Main branch.
  3. Branch from the Main branch to the Release branch using the changeset ID
  4. Branch from the Release branch to the Main branch using the changeset ID

Answer: B


QUESTION: 55

You have a Visual Studio Team Foundation Server 2010 environment. You have a team project with a branch structure that includes Main, Development, and Release branches, as shown in the following graphic. You need to identify all merge operations that have occurred between only the Main and Development branches. What should you do?

  1. Run the tf merge command.
  2. Run the tf merges command.
  3. In Source Control Explorer, run the View History command on the Main branch folder.
  4. In Source Control Explorer, run the View Hierarchy command on the Main branch folder.

Answer: B


QUESTION: 56

Your company has a main office and a branch office. Multiple Visual Studio Team Foundation Server 2010 environments are deployed in the main office. A Team Foundation Server 2010 Proxy server is deployed in the branch office. You need to configure the proxy server to cache version control files for all current and future team project collections from each environment. What should you do?

  1. Update the proxy server configuration file to include each application tier server URL, without the collection name, as a <Uri> item in the <Server> item inside the <Servers> element.
  2. Update the proxy server configuration file to include each application tier server URL, including the collection name, as a <Uri> item in the <Server> item inside the <Servers> element.
  3. Create a system environment variable named TFSPROXY_ALLOWEDSERVERS and set the value to a semicolondelimited list of all the application tier server URLs, without the collection names.

  4. Create a system environment variable named TFSPROXY_ALLOWEDSERVERS and set the value to a semicolondelimited list of all the application tier server URLs, including the collection names.

Answer: A


QUESTION: 57

Your company has a main office and a branch office. A Visual Studio Team Foundation Server 2010 environment is deployed in the main office. A Team Foundation Server 2010 Proxy server is deployed in the branch office and configured to connect to Team Foundation Server. The proxy server has a 100 GB hard drive partition that can be resized. You need to configure the proxy server to use no more than 90% of the available hard drive partition space. What should you do?

  1. Create a system environment variable named TFSPROXY_CACHELIMIT and set the value to PercentageBasedPolicy=90.
  2. Create a system environment variable named TFSPROXY_CACHELIMIT and set the value to
    FixedSizeBasedPolicy=90000.
  3. Update the proxy server configuration file to include the following XML snippet:
    <CacheLimitPolicy>
    <PercentageBasedPolicy>90</PercentageBasedPolicy>
    </CacheLimitPolicy>
  4. Update the proxy server configuration file to include the following XML snippet:
<CacheLimitPolicy>
<FixedSizeBasedPolicy>90000</FixedSizeBasedPolicy>
</CacheLimitPolicy>

Answer: C


QUESTION: 58

You have a Visual Studio Team Foundation Server 2010 environment. Your company develops a custom code analysis rule set for use in a team project. You need to ensure that the team project is utilizing the custom code analysis rule set. You add the Code Analysis checkin policy to the team project. What should you do next?

  1. In the Run this rule set list, choose Microsoft All Rules.
  2. In the Run this rule set list, choose Microsoft Minimum Recommended Rules.
  3. In the Run this rule set list, choose Select Rule Set from Source Control, and then enter the path to a local version of the custom code analysis rule set file.

  4. In the Run this rule set list, choose Select Rule Set from Source Control, and then enter the path to a custom code analysis rule set file stored in version control.

Answer: D


QUESTION: 59

You have a Visual Studio Team Foundation Server 2010 environment. You have a team project that was created by using the MSF for CMMI Process Improvement v5.0 process template. You need to ensure that developers are required to enter the name of the project manager when checking in changesets. What should you do?

  1. Add a required field to the Task work item type.
  2. Add a required checkin note to the team project.
  3. Add a Builds checkin policy to the team project.
  4. Add a Work Items checkin policy to the team project.

Answer: B


QUESTION: 60

You have a Visual Studio Team Foundation Server 2010 environment. You use Visual Studio Team Explorer 2010 to work with a team project that is based on the MSF for CMMI Process Improvement v5.0 process template. You need to require that users associate every changeset with at least one work item during the checkin process.
What should you do?

  1. Add a Work Items checkin policy to the team project.
  2. Select the Evaluate policies and checkin notes before shelving check box in the Shelve window. C. Configure the Microsoft.VSTS.Actions.Checkin action on the Resolved to Closed transition of the Task work item.
D. Clear the Allow check box for the Edit work items in this node permission on the root area path for the Contributors group in the team project.

Answer: A


Microsoft 70-512-Csharp Exam (Visual Studio Team Foundation(R) Server 2010 Administration CCsharp) Detailed Information

Microsoft Certification Program benefits
Learn about the benefits of the Microsoft Certification Program. Find answers to frequently asked questions regarding program benefits and Microsoft accounts.
Program benefits
Hide all
Q. What are the benefits of achieving a Microsoft Certification?
Microsoft Certification is an industry standard that is recognised worldwide. After you earn your Microsoft Certification, you have access to a number of benefits, which can be found on your benefits and exams dashboard.
Q. What will I find on the benefits and exams dashboard and who has access?
Individuals who have passed a Microsoft exam have access to the benefits and exams dashboard.
On the site, you will find:
A downloadable version of your certificate (you can order a printed copy); MOS members will need their Certiport login information
Your official Microsoft Certification downloadable transcript and access to the transcript-sharing tool
A tool to create and download certification logos
Your contact preferences and profile
Your Certification Planner
A sign up for the MCP Flash newsletters
Promotional offers, discounts and additional services
Q. What is a Charter certificate?
Charter Members are the pioneering group of individuals who achieve a certification within six months following the retail release date of the certification. (People who pass the beta exams will receive the Charter certificate after the certification is commercially released.) Charter Members are recognised by being given the Charter version of the certificate acknowledging their early adoption of the technology solution. The Charter version of the certificate includes the word "Charter".
Q. Which certifications are eligible for Charter status?
If you have any of the following certifications, you are eligible for the Charter certificate: Microsoft Certified Solutions Associate (MCSA), Microsoft Certified Solutions Expert (MCSE), Microsoft Certified Solutions Developer (MCSD), Microsoft Certified Technology Specialist (MCTS), Microsoft Certified IT Professional (MCITP), Microsoft Certified Solutions Master (MCSM), or Microsoft Certified Professional Developer (MCPD). Exceptions include those certifications that are released when the technology covered is no longer the latest version of the technology. These include the MCSA: Windows 7, the MCSA: SQL Server 2008 and the MCSA: Windows Server 2008.
In addition, Microsoft Specialist (Specialist) certifications released in and after September 2015 are also eligible for Charter status, including all Windows 10, Big Data Analytics and Cloud Data Platform Specialist certifications.
Q. How much time do I have to order my Charter certificate?
You can digitally download or order your Charter certificate at any point after it is earned.
Q. When does the Charter certificate period start for localised exams?
The six-month "clock" start time is based on the earliest time the certification can be earned, which is typically based on English-language exam availability. For example, if an exam is available in German two months after the English version is available, the German candidate has only four more months to earn a Charter certificate.
Q. I have heard that Microsoft sponsors an Elevate America veterans initiative to help our country's veterans and their spouses acquire the skills and resources that they need to be successful in today's workplace. What is this initiative?
Through this initiative, Microsoft convenes a coalition of public, private and non-profit organisations that are interested in contributing expertise, cash and in-kind resources to help U.S. veterans and their spouses build the skills and access the resources that they need to be successful in today's workforce.
Accessing the benefits and exams dashboard
Hide all
Q. How do I qualify for access to the benefits and exams dashboard?
The benefits and exams dashboard is available if you have passed a Microsoft qualified exam. It provides customised resources specific to your achievements and certifications.
Sign in to the benefits and exams dashboard
Q. How do I access the Microsoft Certification benefits and exams dashboard for the first time?
After you pass your first Microsoft Certification exam, you will receive a welcome email message outlining the steps needed to gain access to the benefits and exams dashboard. Please check your junk folder to ensure that the automatic email message is not blocked by your spam filter. Here are the instructions you will receive in the email message.
Create a Microsoft account if you don't already have one.
On your first visit, click on the link provided in the email and use your Microsoft account to log in to the benefits and exams dashboard.
Note This must be done within 90 days of receiving the email to meet security requirements.
In some cases, you may be required to enter your Microsoft Certification ID (MC ID) and temporary access code, which will be supplied in the email message.
On future visits, log in to the benefits and exams dashboard using the same Microsoft account.
For assistance, go to Microsoft training and certification help.
Q. I do not know my Microsoft Certification ID (formerly MCP ID). What should I do?
Your MC ID is shown in your welcome email as well as in the profile information on the benefits and exams dashboard. If you are unable to access the benefits and exams dashboard, contact your Microsoft Regional Service Centre for assistance.
Q. What is the access code required for the benefits and exams dashboard?
An access code is a unique code that allows first-time access to the benefits and exams dashboard and, if required, is provided in your welcome email. You can only use the access code to sign in to the benefits and exams dashboard for the first time. If you misplace your code or it has retired, contact your Microsoft Regional Service Centre for assistance.
Q. How long does it take for my data to update after accessing the benefits and exams dashboard for the first time?
After you register, you must wait 24 hours before accessing your program benefits.
Q. I am a returning user and cannot access the benefits and exams dashboard. How do I gain access?
If you cannot remember the Microsoft account information associated with your account, or you have other difficulty accessing the benefits and exams dashboard, contact the Microsoft Regional Service Centre in your area.
Note If you have a Hotmail account, MSN email account or Microsoft Passport, it is your Microsoft account.
Q. I saved the URL to my Microsoft Certification Program benefits in my Favourites, but when I navigate there I am redirected to a sign-in page, not the page I am trying to access.
Because online benefits are available only to eligible Microsoft Certification Program members, you must enter your Microsoft account credentials to access your online benefits. After your account is authenticated, you will be redirected to the page you are trying to access.
Q. Why is my name on the benefits and exams dashboard different from what it is in my Microsoft Personal Profile?
You are required to use your legal name for the benefits and exams dashboard. The Microsoft Personal Profile is associated with your Microsoft account.
Q. How do I update my legal name?
To update your legal name, contact your Microsoft Regional Service Centre.
Q. How do I update the information in my Microsoft Personal Profile?
You can update your Microsoft Personal Profile in the Profile Centre.
To change the name that is associated with your Microsoft Certification ID (formerly, MCP ID), contact your Microsoft Regional Service Centre.
Q. I updated my email address at the Profile Centre, but it was not changed on my Microsoft Certification transcript. What is wrong?
It can take up to 48 hours for changes in your profile to appear on your Microsoft Certification transcript. Check your transcript later to verify that your email address has been updated.
Q. I entered an email address in my Microsoft Personal Profile, but the email field is still blank. What happened?
After you update your Personal Profile, a message is sent to the email address noted in your profile. For the changes to be saved, you must follow the instructions in the email message to confirm the update. Otherwise, the email address in your profile will be removed because it has not been confirmed.
Q. How do I use the Microsoft Certification logos, and what are my rights and responsibilities when I use them?
When you access the logo tool, you are required to read and accept the MCP logo guidelines to correctly promote your relationship with Microsoft and to protect the integrity of the logos. You must sign in to the benefits and exams dashboard in order to access these guidelines.
Q. How can I download electronic files of Microsoft Certification logos?
Logos are available for download from the benefits and exams dashboard.
Q. I passed a test a week ago and I want to print my logo, but I cannot select it for printing.
The test that you passed might not qualify you to print that specific logo. If you believe this is an error, contact the Microsoft Regional Service Centre.
Q. How do I report misuse of a Microsoft Certification logo?
Contact the Microsoft Regional Service Centre.
Microsoft account and Profile Centre
Hide all
Q. What is Microsoft account?
Microsoft account (formerly Windows Live ID) enables you to simply use your email address and password to sign in. After you create your Microsoft account, you can access all Microsoft account sites and services. If you already have an MSN Hotmail, MSN Messenger or Passport account, it is your Microsoft account.
Learn more about Microsoft account.
Q. If I do not have a Microsoft account, do I need to set one up to access the benefits and exams dashboard?
Yes. You can sign up for a Microsoft account now. You will not be able to access the benefits and exams dashboard without one.
Q. If I already have a Microsoft account, can I use it to access the benefits and exams dashboard?
Yes.
Q. I do not remember the Microsoft account I used to access the benefits and exams dashboard. What should I do?
If you cannot remember the Microsoft account that you used to access the benefits and exams dashboard, contact your Microsoft Regional Service Centre for assistance.
Q. Will my Microsoft account expire?
If your Microsoft account is unused for one year, your Microsoft account may expire, and you may need to re-establish a Microsoft account.
Q. How do I update my profile?
Log in to the benefits and exams dashboard and, under the Account menu in the top right corner of the page, click Profile settings.
Q. What should I regularly update in my profile?
Update the following information to ensure that you receive communications from Microsoft:
Your contact preferences: Specify whether you want to receive promotional information about Microsoft products, services and events.
Your personal information: View, add or edit your personal contact information, such as your email address, business or personal address and phone numbers.
Your business information: View, add or edit information about your job and your organisation so that we can personalise content and recommend materials that match your job, organisation or industry.
Your technology preferences: View, add or edit information about your technology interests so that we can personalise content and recommend materials that match your interests.
Q. What if I do not want to receive email messages from Microsoft?
You are under no obligation to receive email messages from Microsoft. However, if you indicate that you do not want to receive communications from Microsoft through email, you cannot receive e-newsletters, such as the MCP Flash and MCT Flash. These communications provide up-to-date information on changes in training and certification resources, such as discontinued exams, Microsoft Certified Professional (MCP) benefits and special offers.
Q. How do I ensure that I receive communications by email?
Visit the Microsoft Profile Centre to indicate that you want to receive email messages from Microsoft.
Sign in to the Microsoft Profile Center to view and update your profile
Profile Center screenshot
Click My Contact Preferences, located on either the Profile Centre home page (shown above) or on the left-hand side of the page (shown below). Select E-Mail Address, and then click Save.
Note You can always unsubscribe from selected e-newsletters. However, if you do not select the E-Mail Address option, Microsoft cannot send you any information by email, including product notifications and news.
My Contact Preferences screenshot
Sign-up for e-newsletters: Select Manage Subscriptions on the left-hand side of the page. Tick all of the subscriptions that you want to receive, and then click Subscribe. You can also unsubscribe from publications.
Accessing your transcript
Hide all
Q. Where can I find my transcript or see which exams I have passed?
Access your transcript from the benefits and exams dashboard.
Under the section called Transcript, click on the View link.
Q. How do I give my employer or others access to my transcript via a secure connection that they can trust?
Microsoft offers a tool called Transcript Sharing, which can be accessed from the benefits and exams dashboard. Under the section called Transcript, click the Share link.
You will be asked to create an Access Code (which can be changed at any time) and given a Transcript ID. You will then provide these two codes to your selected audience, along with a URL to view your transcript.
Q. I have certifications from multiple providers; can I combine all my credentials into one transcript?
Microsoft has worked with the IT Certification Council (ITCC), along with other industry certification providers, to provide MCPs with the opportunity to create one transcript across providers. Under the Transcript section of the benefits and exams dashboard, click Create a multi-vendor transcript. You will then be asked to provide your transcript sharing codes. The transcript sharing code can be found by clicking Share your transcript.
Q. What if I cannot print or access my transcript?
If you cannot print or access your transcript, contact your Microsoft Regional Service Centre.
To ensure a prompt response:
Use the email address associated with your Microsoft Certification ID (MC ID), if possible.
Have your Microsoft Certification ID number available.
If you do not know your Microsoft Certification ID, have other information available, such as your address, telephone number, exam numbers and completion dates.
Q. I viewed my transcript but it is missing data. Why can't I see all my data?
It can take up to two weeks for Microsoft to receive and process your exam records. If it has been more than two weeks since you took your exam, and the results still do not appear on your transcript, or if you notice any other problems, contact your Microsoft Regional Service Centre.
Training and certification from Microsoft
Fulfill your potential and make the most of your investment in Microsoft technology with certification, classroom training, e-learning, and books from Microsoft and Microsoft Learning Partners.
Certifications
A Microsoft Certification validates your expertise in a Microsoft technology. As a Microsoft Certified Professional, you’ll have access to community resources and tools that allow you to exchange ideas with peers, increase your knowledge and skills, and broaden your career opportunities.
Microsoft Certified Trainers
Microsoft Certified Trainers (MCTs) are classroom and e-learning instructors, training and certification consultants, authors, conference presenters, and user group leaders who combine their expertise, experience, and passion for training and leadership to help Microsoft customers and partners realize their full learning potential.
Microsoft Learning Partners
Microsoft Partners with the Learning competency (Learning Partners) are training companies that meet stringent Microsoft qualifications to train IT professionals and developers on Microsoft technologies.
Microsoft Imagine Academy
The Microsoft Imagine Academy program connects the world of education to the world of work by enabling faculty and students to acquire new technology skills in an academic setting.
Share this page
Facebook

Comments

Popular posts from this blog

CompTIA SY0-501 Dumps and Practice Tests with Real Questions

Pass4sure SY0-501 Practice Tests with Real Questions

Don't Miss these CompTIA SY0-501 Dumps